Your vinyl sticker comes ready to apply. There are three layers (from top to bottom): tape, sticker and backing paper.

1. Start with a clean dry surface. Sticker is applied to the outside of the glass.
2. Slowly peel off backing paper from sticker. Sticker should adhere to the tape layer. If sticker remains on paper, reattach the layers and rub with your finger firmly over the letter or number and try again.
3. Apply sticker carefully to your car beginning on any side. Using the palm of your hand, gently apply sticker at any side and follow with light pressure.
4. Rub with firm pressure over the entire sticker. Trace the letters and numbers firmly with your finger.
5. Carefully remove tape by pulling back slowly.